// CODE SNIPPET
1910.215(c)(7) Driving Flange
JUMP TO FULL CODE CHAPTER
The driving flange shall be securely fastened to the spindle and the bearing surface shall run true. When more than one wheel is mounted between a single set of flanges, wheels may be cemented together or separated by specially designed spacers. Spacers shall be equal in diameter to the mounting flanges and have equal bearing surfaces. (See paragraph (d)(6) of this section.)
Related Code Sections
1910.215(c)(7) Machinery and Machine Guarding, Driving Flange
The driving flange shall be securely fastened to the spindle and the bearing surface shall run true. When more than one wheel is mounted between ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.215 Abrasive Wheel Machinery > 1910.215(c) Flanges > 1910.215(c)(7) Driving Flange
1910.215(c)(8)(iii) Machinery and Machine Guarding,
on precision grinding machines. Dimensions of such flanges shall never be less than indicated.
Figure No. O-35
Driving flange secured to spindle ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.215 Abrasive Wheel Machinery > 1910.215(c) Flanges > 1910.215(c)(8) Dimensions > 1910.215(c)(8)(iii)
1910.215(c)(8) Machinery and Machine Guarding, Dimensions
Figure No. O-35
Driving flange secured to spindle.
TABLE O-8 - MINIMUM DIMENSIONS FOR STRAIGHT FLANGES USED AS WHEEL SLEEVES FOR PRECISION ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.215 Abrasive Wheel Machinery > 1910.215(c) Flanges > 1910.215(c)(8) Dimensions
1910.215 Machinery and Machine Guarding, Abrasive Wheel Machinery
);
Figure No. O-32
Driving flange secured to
spindle ...
1910.215(c)(4)(ii) Machinery and Machine Guarding,
Type 27 and Type 28 wheels, because of their shape and usage, require specially designed adaptors. The back flange shall extend beyond the central ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.215 Abrasive Wheel Machinery > 1910.215(c) Flanges > 1910.215(c)(4) Uniformity of Diameter > 1910.215(c)(4)(ii)