// CODE SNIPPET
1910.110(d)(9) Drips for Condensed Gas
JUMP TO FULL CODE CHAPTER
Where vaporized gas on the low-pressure side of the system may condense to a liquid at normal operating temperatures and pressures, suitable means shall be provided for revaporization of the condensate.
Related Code Sections
1910.110(d)(9) Hazardous Materials, Drips for Condensed Gas
Where vaporized gas on the low-pressure side of the system may condense to a liquid at normal operating temperatures and pressures, suitable means ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.110 Storage and Handling of Liquefied Petroleum Gases > 1910.110(d) > 1910.110(d)(9) Drips for Condensed Gas
1910.253(d)(3)(iv) Welding, Cutting, and Brazing,
Low points in piping carrying moist gas shall be drained into drip pots constructed so as to permit pumping or draining out the condensate ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.253 Oxygen-Fuel Gas Welding and Cutting > 1910.253(d) Service Piping Systems > 1910.253(d)(3) Installation > 1910.253(d)(3)(iv)
1910.103(c)(1)(v) Hazardous Materials, Piping, Tubing, and Fittings
and tubing (above -20 deg. F.) shall conform to the applicable sections of Pressure Piping Section 2 - Industrial Gas and Air Piping, ANSI B31.1-1967 ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.103 Hydrogen > 1910.103(c) Liquefied Hydrogen Systems > 1910.103(c)(1) Design > 1910.103(c)(1)(v) Piping, Tubing, and Fittings
1910.111(d)(13) Hazardous Materials, Condensers
The condenser system may be cooled by air or water or both. The condenser shall be designed for at least 250 p.s.i.g. Provision shall be made ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.111 Storage and Handling of Anhydrous Ammonia > 1910.111(d) Refrigerated Storage Systems > 1910.111(d)(13) Condensers
1910.268(i)(9) Special Industries, Lead Work
The wiping of lead joints using melted solder, gas fueled torches, soldering irons or other appropriate heating devices, and the soldering of wires ...
OSHA 1910 General Industry > R Special Industries > 1910.268 Telecommunications > 1910.268(i) Other Tools and Personal Protective Equipment > 1910.268(i)(9) Lead Work