// CODE SNIPPET
803 Dressing, Fitting, and Locker Rooms
JUMP TO FULL CODE CHAPTER
Dressing, fitting, and locker rooms shall comply with 803.
Advisory 803.1 General. Partitions and doors should be designed to ensure people using accessible dressing and fitting rooms privacy equivalent to that afforded other users of the facility. Section 903.5 requires dressing room bench seats to be installed so that they are at the same height as a typical wheelchair seat, 17 inches (430 mm) to 19 inches (485 mm). However, wheelchair seats can be lower than dressing room benches for people of short stature or children using wheelchairs.
A bench complying with 903 shall be provided within the room.
Coat hooks provided within the room shall be located within one of the reach ranges specified in 308. Shelves shall be 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground.
Related Code Sections
222 Scoping Requirements, Dressing, Fitting, and Locker Rooms
Where dressing rooms, fitting rooms, or locker rooms are provided, at least 5 percent, but no fewer than one, of each type of use in each cluster ...
803 Special Rooms, Spaces, and Elements, Dressing, Fitting, and Locker Rooms
Dressing, fitting, and locker rooms shall comply with 803. Advisory 803.1 General. Partitions and doors should be designed to ensure people ...
2010 ADA Standards > 8 Special Rooms, Spaces, and Elements > 803 Dressing, Fitting, and Locker Rooms
803.4 Special Rooms, Spaces, and Elements, Benches
A bench complying with 903 shall be provided within the room ...
2010 ADA Standards > 8 Special Rooms, Spaces, and Elements > 803 Dressing, Fitting, and Locker Rooms > 803.4 Benches
803.5 Special Rooms, Spaces, and Elements, Coat Hooks and Shelves
Coat hooks provided within the room shall be located within one of the reach ranges specified in 308. Shelves shall be 40 inches (1015 mm ...
2010 ADA Standards > 8 Special Rooms, Spaces, and Elements > 803 Dressing, Fitting, and Locker Rooms > 803.5 Coat Hooks and Shelves
225.2.1 Scoping Requirements, Lockers
Where lockers are provided, at least 5 percent, but no fewer than one of each type, shall comply with 811. Advisory 225.2.1 Lockers. Different ...