// CODE SNIPPET
1926.966(c) Draw-Out-Type Circuit Breakers
JUMP TO FULL CODE CHAPTER
The employer shall ensure that, when employees remove or insert draw-outtype circuit breakers, the breaker is in the open position. The employer shall also render the control circuit inoperable if the design of the equipment permits.
Related Code Sections
1926.966(c) Electric Power Transmission and Distribution, Draw-Out-Type Circuit Breakers
The employer shall ensure that, when employees remove or insert draw-outtype circuit breakers, the breaker is in the open position. The employer ...
OSHA 1926 Construction > V Electric Power Transmission and Distribution > 1926.966 Substations > 1926.966(c) Draw-Out-Type Circuit Breakers
1926.404(e)(1)(vi) Electrical, Circuit Breakers
Circuit breakers shall clearly indicate whether they are in the open (off) or closed (on) position ...
OSHA 1926 Construction > K Electrical > 1926.404 Wiring Design and Protection > 1926.404(e) Overcurrent Protection > 1926.404(e)(1) 600 Volts, Nominal, or Less > 1926.404(e)(1)(vi) Circuit Breakers
1926.408(a)(2)(i) Electrical, Circuit Breakers
Circuit breakers located indoors shall consist of metal-enclosed or fire-resistant, cell-mounted units. In locations accessible only to qualified ...
OSHA 1926 Construction > K Electrical > 1926.408 Special Systems > 1926.408(a) Systems Over 600 Volts, Nominal > 1926.408(a)(2) Interrupting and Isolating Devices > 1926.408(a)(2)(i) Circuit Breakers
1926.405(e)(2) Electrical, Switches and Circuit Breakers
Switches, circuit breakers, and switchboards installed in wet locations shall be enclosed in weatherproof enclosures ...
OSHA 1926 Construction > K Electrical > 1926.405 Wiring Methods, Components, and Equipment for General Use > 1926.405(e) Enclosures for Damp or Wet Locations > 1926.405(e)(2) Switches and Circuit Breakers
1926.408(a)(3)(ii) Electrical, Guarding Live Parts
All energized switching and control parts shall be enclosed in effectively grounded metal cabinets or enclosures. Circuit breakers and protective ...
OSHA 1926 Construction > K Electrical > 1926.408 Special Systems > 1926.408(a) Systems Over 600 Volts, Nominal > 1926.408(a)(3) Mobile and Portable Equipment > 1926.408(a)(3)(ii) Guarding Live Parts