// CODE SNIPPET
1910.265(d)(3)(vi) Drag Saws
JUMP TO FULL CODE CHAPTER
Where reciprocating log cutoff saws (drag saws) are provided, they shall not project into walkway or aisle.
Related Code Sections
1910.265(b)(15) Special Industries, Drag Saw
The term drag saw means a power-driven, reciprocating crosscut saw mounted on suitable frame and used for bucking logs ...
OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(b) Definitions Applicable to This Section > 1910.265(b)(15) Drag Saw
1910.213(r)(2) Machinery and Machine Guarding,
Drag saws shall be so located as to give at least a 4-foot clearance for passage when the saw is at the extreme end of the stroke ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.213 Woodworking Machinery Requirements > 1910.213(r) Miscellaneous Woodworking Machines > 1910.213(r)(2)
1910.218(j)(2) Machinery and Machine Guarding, Saws
Every saw shall be provided with a guard of not less than one-eighth inch sheet metal positioned to stop flying sparks ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.218 Forging Machines > 1910.218(j) > 1910.218(j)(2) Saws
1910.213 Machinery and Machine Guarding, Woodworking Machinery Requirements
Any automatic cutoff saw that strokes continuously without ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.213 Woodworking Machinery Requirements
1910.265 Special Industries, Sawmills
drag saw means a power-driven, reciprocating crosscut saw mounted on suitable frame and used for bucking logs ...