// CODE SNIPPET
M1801.2 Draft Requirements
JUMP TO FULL CODE CHAPTER
A venting system shall satisfy the draft requirements of the appliance in accordance with the manufacturer's installation instructions, and shall be constructed and installed to develop a positive flow to convey combustion products to the outside atmosphere.
Related Code Sections
M1801.2 Chimneys and Vents, Draft Requirements
A venting system shall satisfy the draft requirements of the appliance in accordance with the manufacturer's installation instructions, and shall ...
Residential Code 2018 of Kansas > 18 Chimneys and Vents > M1801 General > M1801.2 Draft Requirements
503.3.1 Chimneys and Vents, Appliance Draft Requirements
A venting system shall satisfy the draft requirements of the appliance in accordance with the manufacturer's instructions ...
Fuel Gas Code 2018 of Kansas > 5 Chimneys and Vents > 503 (IFGS) Venting of Appliances > 503.3 Design and Construction > 503.3.1 Appliance Draft Requirements
G2427.3.1 Fuel Gas, (503.3.1) Appliance Draft Requirements
A venting system shall satisfy the draft requirements of the appliance in accordance with the manufacturer's instructions ...
Residential Code 2018 of Kansas > 24 Fuel Gas > G2427 (503) Venting of Appliances > G2427.3 (503.3) Design and Construction > G2427.3.1 (503.3.1) Appliance Draft Requirements
G2427.12.2 Fuel Gas, (503.12.2) Installation
hood is not supplied by the appliance manufacturer where one is required, a draft hood shall be installed, shall be of a listed or approved ...
Residential Code 2018 of Kansas > 24 Fuel Gas > G2427 (503) Venting of Appliances > G2427.12 (503.12) Draft Hoods and Draft Controls > G2427.12.2 (503.12.2) Installation
M1802.3 Chimneys and Vents, Draft Regulators
Where required, draft regulators shall be installed in the same room ...
Residential Code 2018 of Kansas > 18 Chimneys and Vents > M1802 Vent Components > M1802.3 Draft Regulators