// CODE SNIPPET
28.5 Door Jamb Markings
Go To Full Code Chapter
28.5.1
The centerline of the characters shall be 60 inches (60" = 1524mm) above finish floor. See Fig. 28a.
28.5.2
Such characters shall be two inches (2" = 51mm) high and on a contrasting color background.
28.5.3
Permanently applied plates are acceptable if they are secured to the jambs.
Upcodes Diagrams
Related Code Sections
28.5 Elevators, Door Jamb Markings
Both jambs of all elevator hoistway entrances shall have raised and Braille floor designation jambs that
are visible from within the car ...
F101.4 Rodentproofing, Doors
Doors on which metal protection has been applied shall be hinged so as to be free swinging. When closed, the maximum clearance between any door, door ...
F101.4 Rodentproofing, Doors
Doors on which metal protection has been applied shall be hinged so as to be free swinging. When closed, the maximum clearance between any door, door ...
2.14.5.6.4 Electric Elevators,
(a) the car side of a panel and the related car entrance jamb (b) related panels of multispeed entrances (c) the car side of the panel ...
2.13.4.2.2 Electric Elevators, Door Travel in the Code Zone Distance
50 mm (2 in.) away from the open jamb to a point 50 mm (2 in.) away from the opposite jamb. (b) For all center-opening sliding doors using single ...
Safety Code for Elevators and Escalators 2013 of Massachusetts > 2 Electric Elevators > 2.13 Power Operation of Hoistway Doors and Car Doors > 2.13.4 Closing Limitations for Power-Operated Horizontally Sliding Hoistway Doors and Horizontally Sliding Car Doors or Gates > 2.13.4.2 Closing Mechanism > 2.13.4.2.2 Door Travel in the Code Zone Distance