// CODE SNIPPET
P3105.1 Distance of Trap From Vent
JUMP TO FULL CODE CHAPTER
Each fixture trap shall have a protecting vent located so that the slope and the developed length in the fixture drain from the trap weir to the vent fitting are within the limits indicated in Table P3105.1.
Exception: The developed length of the fixture drain from the trap weir to the vent fitting for self-siphoning fixtures, such as water closets, shall not be limited.
Related Code Sections
909.1 Vents, Distance of Trap From Vent
to the vent fitting for self-siphoning fixtures, such as water closets, shall not be limited. TABLE 909.1 MAXIMUM DISTANCE OF FIXTURE TRAP FROM VENT ...
P3105.1 Vents, Distance of Trap From Vent
to the vent fitting for self-siphoning fixtures, such as water closets, shall not be limited. TABLE P3105.1 MAXIMUM DISTANCE OF FIXTURE TRAP FROM VENT ...
Residential Code 2018 of Kansas > 31 Vents > P3105 Fixture Vents > P3105.1 Distance of Trap From Vent
917.6 Vents, Additional Venting Required
Additional venting shall be provided where more than one water closet discharges to a horizontal branch and where the distance from a fixture trap ...
Plumbing Code 2018 of Kansas > 9 Vents > 917 Single-Stack Vent System > 917.6 Additional Venting Required
P3108.5 Vents, Trap Weir to Wet-Vent Distances
The maximum developed length of wet-vented fixture drains shall comply with Table P3105.1 ...
Residential Code 2018 of Kansas > 31 Vents > P3108 Wet Venting > P3108.5 Trap Weir to Wet-Vent Distances
Section P3201 Traps, Fixture Traps
Each plumbing fixture shall be separately trapped by a water seal trap. The vertical distance from the fixture ...