// CODE SNIPPET
Jump To Full Code Chapter
Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of the water closet measured to the centerline of the dispenser. The outlet of the dispenser shall be 15 inches (380 mm) minimum and 48 inches (1220 mm) maximum above the finish floor and shall not be located behind grab bars. Dispensers shall not be of a type that controls delivery or that does not allow continuous paper flow.
Advisory 604.7 Dispensers. If toilet paper dispensers are installed above the side wall grab bar, the outlet of the toilet paper dispenser must be 48 inches (1220 mm) maximum above the finish floor and the top of the gripping surface of the grab bar must be 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor.
Related Code Sections
604.7 Plumbing Elements and Facilities, Dispensers
Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of the water closet ...
904.5.1 Built-in Elements, Self-Service Shelves and Dispensing Devices
Self-service shelves and dispensing devices for tableware, dishware, condiments, food and beverages shall comply with 308 ...
606.1 Plumbing Elements and Facilities, General
Lavatories and sinks shall comply with 606. Advisory 606.1 General. If soap and towel dispensers are provided, they must be located within ...
228 Scoping Requirements, Depositories, Vending Machines, Change Machines, Mail Boxes, and Fuel Dispensers
Where provided, at least one of each type of depository, vending machine, change machine, and fuel dispenser shall comply with 309. EXCEPTION ...