// CODE SNIPPET
1926.964(d)(3) Disconnecting Load Lines
Go To Full Code Chapter
The employer shall ensure that employees do not detach the loadline from a member or section until they safely secure the load.
Related Code Sections
1926.964(d)(3) Electric Power Transmission and Distribution, Disconnecting Load Lines
The employer shall ensure that employees do not detach the loadline from a member or section until they safely secure the load ...
1926.960(e)(2) Electric Power Transmission and Distribution, Disconnecting
When disconnecting equipment or lines from an energized circuit by means of a conducting wire or device, an employee shall remove the source end ...
1926.554 Helicopters, Hoists, Elevators, and Conveyors, Overhead Hoists
The safe working load of the overhead hoist, as determined by the manufacturer, shall be indicated on the hoist, and this safe working load shall ...
1926.961(c)(2) Electric Power Transmission and Distribution, Open Disconnecting Means
be supplied to the particular lines and equipment to be deenergized are open. The employer shall render such means inoperable, unless its design does not so ...
1926.1423(j) Cranes and Derricks in Construction, Anchoring to the Load Line
A personal fall arrest system is permitted to be anchored to the crane/derrick's hook (or other part of the load line) where all of the following ...