// CODE SNIPPET
E 403.4.5 Discharge Water to Drain
JUMP TO FULL CODE CHAPTER
Where discharge water is not recovered for reuse, the sump overflow line shall not be directly connected to a drain. Where the discharge water is discharged into a sanitary drain, an air gap of not less than 6 inches (152 mm) shall be provided between the termination of the discharge line and the drain opening. The discharge line shall terminate in a location that is visible to the building owner, tenants, or maintenance personnel.
Related Code Sections
E 403.4.5 Sustainable Practices, Discharge Water to Drain
Where discharge water is not recovered for reuse, the sump overflow line shall not be directly connected to a drain. Where the discharge water ...
2018 Uniform Mechanical Code of Nevada > E Sustainable Practices > E 403.0 HVAC Water Use > E 403.4 Evaporative Cooler Water Use > E 403.4.5 Discharge Water to Drain
1101.6.5 Storm Drainage, Open Area
(3048 mm) from a property line. It is impracticable to discharge such drains to a storm drain, to an approved water course, to the front street curb ...
2018 Uniform Plumbing Code of Nevada > 11 Storm Drainage > 1101.0 General > 1101.6 Subsoil Drains > 1101.6.5 Open Area
1016.1 Traps and Interceptors, Discharge
Where the discharge of a fixture or drain contains solids or semi-solids heavier than water that would be harmful to a drainage system or cause ...
2018 Uniform Plumbing Code of Nevada > 10 Traps and Interceptors > 1016.0 Sand Interceptors > 1016.1 Discharge
22.214.171.124 Installation Requirements, Discharge of Drain Valves
The drain discharge shall conform to any health or water department regulations ...
Standard for the Installation of Sprinkler Systems 2016 of Nevada > 8 Installation Requirements > 8.16 Piping Installation > 8.16.2 Drainage > 126.96.36.199 Discharge of Drain Valves
1011.0 Traps and Interceptors, Minimum Requirements for Auto Wash Racks
water and shall drain or discharge into an approved interceptor (clarifier) ...
2018 Uniform Plumbing Code of Nevada > 10 Traps and Interceptors > 1011.0 Minimum Requirements for Auto Wash Racks