// CODE SNIPPET
1308.7.6 Discharge of Vents
JUMP TO FULL CODE CHAPTER
The discharge of vents shall be in accordance with the following:
- The discharge stacks, vents, or outlet parts of all pressure-relieving and pressure-limiting devices shall be located so that gas is safely discharged to the outdoors.
- Discharge stacks or vents shall be designed to prevent the entry of water, insects, or other foreign material that could cause blockage. The discharge stack or vent line shall be at least the same size as the outlet of the pressure-relieving device. [NFPA 54:5.9.8.1, 5.9.8.2]
Related Code Sections
1208.8.6 Fuel Gas Piping, Discharge of Vents
The discharge of vents shall be in accordance with the following requirements: The discharge stacks, vents, or outlet parts of all pressure ...
2018 Uniform Plumbing Code of Nevada > 12 Fuel Gas Piping > 1208.0 Gas Piping System Design, Materials, and Components > 1208.8 Gas Pressure Regulators > 1208.8.6 Discharge of Vents
1308.7.6 Fuel Gas Piping, Discharge of Vents
The discharge of vents shall be in accordance with the following: The discharge stacks, vents, or outlet parts of all pressure-relieving ...
2018 Uniform Mechanical Code of Nevada > 13 Fuel Gas Piping > 1308.0 Gas Piping System Design, Materials, and Components > 1308.7 Gas Pressure Regulators > 1308.7.6 Discharge of Vents
1112.11.2 Refrigeration, Discharging Location Exterior to Building
be in accordance with the following: The point of vent discharge shall be located not less than 15 feet (4572 mm) above the adjoining ground level ...
2018 Uniform Mechanical Code of Nevada > 11 Refrigeration > 1112.0 Pressure-Relief Devices > 1112.11 Discharge From Pressure-Relief Devices > 1112.11.2 Discharging Location Exterior to Building
908.2.2 Vents, Size
The wet vent shall be sized based on the fixture unit discharge into the wet vent. The wet vent shall be not less than 2 inches (50 mm) in diameter ...
2018 Uniform Plumbing Code of Nevada > 9 Vents > 908.0 Wet Venting > 908.2 Horizontal Wet Venting for a Bathroom Group > 908.2.2 Size
911.4.2 Vents, Fixture Drain or Branch
horizontal branch. The discharge to a relief vent shall not exceed 4 fixture units ...
2018 Uniform Plumbing Code of Nevada > 9 Vents > 911.0 Circuit Venting > 911.4 Relief Vent > 911.4.2 Fixture Drain or Branch