// CODE SNIPPET
Section P2707 Directional Fittings
Related Code Sections
Section P2707 Plumbing Fixtures, Directional Fittings
Approved directional-type branch fittings shall be installed in fixture tailpieces receiving the discharge from food-waste disposer units ...
706.3 Sanitary Drainage, Installation of Fittings
Fittings shall be installed to guide sewage and waste in the direction of flow. Change in direction shall be made by fittings installed in accordance ...
Plumbing Code 2018 of Kansas > 7 Sanitary Drainage > 706 Connections Between Drainage Piping and Fittings > 706.3 Installation of Fittings
P3005.1 Sanitary Drainage, Drainage Fittings and Connections
of these drainage fittings in accordance with Table P3005.1. Change in direction by combination fittings, heel or side inlets or increasers shall be installed ...
Residential Code 2018 of Kansas > 30 Sanitary Drainage > P3005 Drainage System > P3005.1 Drainage Fittings and Connections
(E) Wiring Methods and Materials, Fittings
Cable trays shall include fittings or other suitable means for changes in direction and elevation of runs ...
National Electrical Code 2017 of Kansas > 3 Wiring Methods and Materials > 392 Cable Trays > 392.100 Construction > (E) Fittings
(A) Special Occupancies, At Dispenser
A listed seal shall be provided in each conduit run entering or leaving a dispenser or any cavities or enclosures in direct communication therewith ...
National Electrical Code 2017 of Kansas > 5 Special Occupancies > 514 Motor Fuel Dispensing Facilities > 514.9 Sealing > (A) At Dispenser