// CODE SNIPPET
700.23 Dimmer and Relay Systems. A
JUMP TO FULL CODE CHAPTER
dimmer or relay system containing more than one dimmer or relay and listed for use in emergency systems shall be permitted to be used as a control device for energizing emergency lighting circuits. Upon failure of normal power, the dimmer or relay system shall be permitted to selectively energize only those branch circuits required to provide minimum emergency illumination using a control bypass function. Where the dimmer or relay system is fed by a normal/emergency source from an upstream transfer switch, normal power sensing for this function shall be permitted to be from a normal-only power source upstream of the transfer switch. All branch circuits supplied by the dimmer or relay system cabinet shall comply with the wiring methods of Article 700.
Related Code Sections
700.23 Special Conditions, Dimmer and Relay Systems. A
dimmer or relay system containing more than one dimmer or relay and listed for use in emergency systems shall be permitted to be used as a control ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 700 Emergency Systems > 700.23 Dimmer and Relay Systems. A
520.25 Special Occupancies, Dimmers
Dimmers shall comply with 520.25(A) through (C ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 520 Theaters, Audience Areas of Motion Picture and Television Studios, Performance Areas, and Similar Locations > 520.25 Dimmers
(2) Wiring and Protection, Protective Relays
Each protective relay shall be demonstrated to operate by injecting current or voltage, or both, at the associated instrument transformer output ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 225 Outside Branch Circuits and Feeders > 225.56 Inspections and Tests > (A) Pre-Energization and Operating Tests > (2) Protective Relays
(A) Equipment for General Use, Faceplates
Faceplates provided for snap switches, dimmers, and control switches mounted in boxes and other enclosures shall be installed so as to completely ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 404 Switches > 404.9 General-Use Snap Switches, Dimmers, and Control Switches > (A) Faceplates