// CODE SNIPPET
605.15 Dielectric Unions
JUMP TO FULL CODE CHAPTER
Dielectric unions where installed at points of connection where there is a dissimilarity of metals shall be in accordance with AS SE 1079.
Related Code Sections
605.15 Water Supply and Distribution, Dielectric Unions
Dielectric unions where installed at points of connection where there is a dissimilarity of metals shall be in accordance with AS SE 1079 ...
2018 Uniform Plumbing Code of Nevada > 6 Water Supply and Distribution > 605.0 Joints and Connections > 605.15 Dielectric Unions
1211.14.1 Hydronics, Copper or Copper Alloy Pipe or Tubing to Threaded Pipe Joints
inches (152 mm)], dielectric fitting, or dielectric union in accordance with ASSE 1079. The joint between the copper or copper alloy pipe or tubing ...
2018 Uniform Mechanical Code of Nevada > 12 Hydronics > 1211.0 Joints and Connections > 1211.14 Joints Between Various Materials > 1211.14.1 Copper or Copper Alloy Pipe or Tubing to Threaded Pipe Joints
1309.14 Health Care Facilities and Medical Gas and Medical Vacuum Systems, Dielectric Fittings
Dielectric fittings that comply with the following shall be permitted only where required by the manufacturer of special medical equipment ...
2018 Uniform Plumbing Code of Nevada > 13 Health Care Facilities and Medical Gas and Medical Vacuum Systems > 1309.0 Joints and Connections > 1309.14 Dielectric Fittings
315.1 General Regulations, Unions
Approved unions shall be permitted to be used in drainage piping where accessibly located in the trap seal or between a fixture and its trap ...
2018 Uniform Plumbing Code of Nevada > 3 General Regulations > 315.0 Joints and Connections > 315.1 Unions
609.5 Water Supply and Distribution, Unions
Unions shall be installed in the water supply piping not more than 12 inches (305 mm) of regulating equipment, water heating, conditioning tanks ...
2018 Uniform Plumbing Code of Nevada > 6 Water Supply and Distribution > 609.0 Installation, Testing, Unions, and Location > 609.5 Unions