// CODE SNIPPET
603.1.6.1 Diagrams
JUMP TO FULL CODE CHAPTER
Contractors installing industrial oil-burning systems shall furnish not less than two copies of diagrams showing the main oil lines and controlling valves, one copy of which shall be posted at the oil-burning equipment and another at an approved location that will be accessible in case of emergency.
Related Code Sections
1204.5.1.1 Energy Systems, Diagram
The labels in Section 1204.5.1 shall include a simple diagram of a building with a roof. Diagram sections in red signify sections of the solar ...
2020 Minnesota State Fire Code > 12 Energy Systems > 1204 Solar Photovoltaic Power Systems > 1204.5 Buildings With Rapid Shutdown > 1204.5.1 Rapid Shutdown Type > 1204.5.1.1 Diagram
(B) Equipment for General Use, Diagram
A permanent and legible single-line diagram of the local switching arrangement, clearly identifying each point of connection to the high-voltage ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 490 Equipment Over 1000 Volts, Nominal > 490.25 Backfeed > (B) Diagram
603.1.6.1 Building Services and Systems, Diagrams
Contractors installing industrial oil-burning systems shall furnish not less than two copies of diagrams showing the main oil lines and controlling ...
2020 Minnesota State Fire Code > 6 Building Services and Systems > 603 Fuel-Fired Appliances > 603.1 Installation > 603.1.6 Testing, Diagrams and Instructions > 603.1.6.1 Diagrams
603.1.6.1 Building Services and Systems, Diagrams
Contractors installing industrial oil-burning systems shall furnish not less than two copies of diagrams showing the main oil lines and controlling ...
Minnesota Fire Code 2015 > 6 Building Services and Systems > 603 Fuel-Fired Appliances > 603.1 Installation > 603.1.6 Testing, Diagrams and Instructions > 603.1.6.1 Diagrams
215.5 Wiring and Protection, Diagrams of Feeders
If required by the authority having jurisdiction, a diagram showing feeder details shall be provided prior to the installation of the feeders. Such ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 215 Feeders > 215.5 Diagrams of Feeders