// CODE SNIPPET
406.6 Diagonal Curb Ramps
JUMP TO FULL CODE CHAPTER
Diagonal or corner type curb ramps with returned curbs or other well-defined edges shall have the edges parallel to the direction of pedestrian flow. The bottom of diagonal curb ramps shall have a clear space 48 inches (1220 mm) minimum outside active traffic lanes of the roadway. Diagonal curb ramps provided at marked crossings shall provide the 48 inches (1220 mm) minimum clear space within the markings. Diagonal curb ramps with flared sides shall have a segment of curb 24 inches (610 mm) long minimum located on each side of the curb ramp and within the marked crossing.
Related Code Sections
406.6 Accessible Routes, Diagonal Curb Ramps
Diagonal or corner type curb ramps with returned curbs or other well-defined edges shall have the edges parallel to the direction of pedestrian flow ...
(i) 28 CFR 35.151 New Construction and Alterations, Curb Ramps
Newly constructed or altered streets, roads, and highways must contain curb ramps or other sloped areas at any intersection having curbs or other ...
405.9.2 Accessible Routes, Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 ...
2010 ADA Standards > 4 Accessible Routes > 405 Ramps > 405.9 Edge Protection > 405.9.2 Curb or Barrier
406.2 Accessible Routes, Counter Slope
Counter slopes of adjoining gutters and road surfaces immediately adjacent to the curb ramp shall not be steeper than 1:20. The adjacent ...