// CODE SNIPPET
(B) Device Removal
Related Code Sections
(B) Wiring Methods and Materials, Device Removal
forth, where the removal of such devices would interrupt the continuity ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 300 General Requirements for Wiring Methods and Materials > 300.13 Mechanical and Electrical Continuity— Conductors > (B) Device Removal
220.127.116.11.2 General Requirements,
Where an automatic transfer device is removed from a material lift and is not replaced, the installation shall conform to Section 7.4, Material Lifts ...
Safety Code for Elevators and Escalators 2016 of Minnesota > 8 General Requirements > 8.7 Alterations > 8.7.7 Alterations to Dumbwaiters and Material Lifts > 18.104.22.168 Material Lifts and Dumbwaiters With Automatic Transfer Devices > 22.214.171.124.2
126.96.36.199.2 Hydraulic Elevators,
devices or means used for preventing the separation of the parts connected shall be removable only with the use of tools. Devices or means removable ...
Safety Code for Elevators and Escalators 2016 of Minnesota > 3 Hydraulic Elevators > 3.19 Valves, Pressure Piping, and Fittings > 3.19.3 Connections and Fittings > 188.8.131.52 Grooved Pipe Fittings > 184.108.40.206.2
220.127.116.11.4 Special Application Elevators,
The exit cover shall be equipped with a switch or contact that, when opened, will cause a device to remove power from the machine motor and brake ...
Safety Code for Elevators and Escalators 2016 of Minnesota > 5 Special Application Elevators > 5.7 Special Purpose Personnel Elevators > 5.7.10 Car Enclosures, Car Doors and Gates, and Car Illumination > 18.104.22.168 Emergency Exits > 22.214.171.124.4
308.1.3 General Requirements, Torches for Removing Paint
Persons utilizing a torch or other flame-producing device for removing paint from a structure shall provide a minimum of one portable fire ...
Minnesota Fire Code 2015 > 3 General Requirements > 308 Open Flames > 308.1 General > 308.1.3 Torches for Removing Paint