// CODE SNIPPET
P2904.4.1 Determining Required Flow Rate for Each Sprinkler
JUMP TO FULL CODE CHAPTER
The minimum required flow for each sprinkler shall be determined using the sprinkler manufacturer's published data for the specific sprinkler model based on all of the following:
- The area of coverage.
- The ceiling configuration.
- The temperature rating.
- Any additional conditions specified by the sprinkler manufacturer.
Related Code Sections
P2904.4.1 Water Supply and Distribution, Determining Required Flow Rate for Each Sprinkler
The minimum required flow for each sprinkler shall be determined using the sprinkler manufacturer's published data for the specific sprinkler model ...
Residential Code 2018 of Kansas > 29 Water Supply and Distribution > P2904 Dwelling Unit Fire Sprinkler Systems > P2904.4 Determining System Design Flow > P2904.4.1 Determining Required Flow Rate for Each Sprinkler
23.4.4.7* Plans and Calculations, Design Area Sprinklers
Each sprinkler in the design area and the remainder of the hydraulically designed system shall discharge at a flow rate at least equal ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 23 Plans and Calculations > 23.4 Hydraulic Calculation Procedures > 23.4.4* Calculation Procedure > 23.4.4.7* Design Area Sprinklers
8.17.4 Installation Requirements, System Connections
sprinklers, the trip test manifold shall be arranged to simulate two sprinklers on each of two sprinkler branch lines. When flow is from three ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 8 Installation Requirements > 8.17 System Attachments > 8.17.4 System Connections
22.27.1.1* Special Occupancy Requirements, Sprinkler System Water Supply
The fire water supply shall be calculated on the basis of the largest expected flow rate for a period of 2 hours but shall not be less than 300,000 ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 22 Special Occupancy Requirements > 22.27 Advanced Light Water Reactor Electric Generating Plants > 22.27.1 Design Requirements > 22.27.1.1* Sprinkler System Water Supply
23.4.4* Plans and Calculations, Calculation Procedure
The calculated pressure at each sprinkler shall be used to determine the discharge flow rate for that particular ...
Standard for the Installation of Sprinkler Systems 2016 of Kansas > 23 Plans and Calculations > 23.4 Hydraulic Calculation Procedures > 23.4.4* Calculation Procedure