// CODE SNIPPET
Section E202 Determination of Pipe Volumes
JUMP TO FULL CODE CHAPTER
Where required for engineering design purposes, Table E202.1 shall be used to determine the approximate internal volume of water distribution piping.
TABLE E202.1 INTERNAL VOLUME OF VARIOUS WATER DISTRIBUTION TUBING
TABLE E202.1 INTERNAL VOLUME OF VARIOUS WATER DISTRIBUTION TUBING
OUNCES OF WATER PER FOOT OF TUBE | |||
Size Nominal, Inch | Copper Type M | Copper Type L | Copper Type K |
3/8 | 1.06 | 0.97 | 0.84 |
1/2 | 1.69 | 1.55 | 1.45 |
3/4 | 3.43 | 3.22 | 2.90 |
1 | 5.81 | 5.49 | 5.17 |
11/4 | 8.70 | 8.36 | 8.09 |
11/2 | 12.18 | 11.83 | 11.45 |
2 | 21.08 | 20.58 | 20.04 |
For SI: 1 ounce = 0.030 liter.
Related Code Sections
Section E202 Sizing of Water Piping System, Determination of Pipe Volumes
Where required for engineering design purposes, Table E202.1 shall be used to determine the approximate internal volume of water distribution piping ...
Section E202 Sizing of Water Piping System, Determination of Pipe Volumes
Where required for engineering design purposes, Table E202.1 shall be used to determine the approximate internal volume of water distribution piping ...
8.17.4.2* Installation Requirements, Dry Pipe Systems
When the capacity (volume) of the dry pipe system has been determined in accordance with 7.2.3.7, the following shall apply: When ...
Standard for the Installation of Sprinkler Systems 2016 of New York City > 8 Installation Requirements > 8.17 System Attachments > 8.17.4 System Connections > 8.17.4.2* Dry Pipe Systems
7.2.3.1* System Requirements,
The system capacity (volume) controlled by a dry pipe valve shall be determined by 7.2.3.2, 7.2.3.3, 7.2.3.4, 7.2.3.5, or 7.2.3.7 ...
Standard for the Installation of Sprinkler Systems 2016 of New York City > 7 System Requirements > 7.2* Dry Pipe Systems > 7.2.3* Size of Systems > 7.2.3.1*
1104.4 Refrigeration, Volume Calculations
permanent openings or HVAC ducts, the volume of the smallest, enclosed occupied space shall be used to determine the permissible quantity ...
NYC Mechanical Code 2008 > 11 Refrigeration > 1104 System Application Requirements > 1104.4 Volume Calculations