// CODE SNIPPET
K103.2 Determination of Loads
JUMP TO FULL CODE CHAPTER
Hydrostatic loads, based on the depth of water determined by the WSEL200, shall be determined in accordance with Chapter 5 of ASCE 7.
Reduction of hydrostatic loads may be accomplished by allowing for the automatic entry and exit of floodwaters to minimize unbalanced loads. Such means shall be designed by a registered design professional and include, but are not limited to, openings, valves, and panels designed to yield under load.
Exception: When two flood vents are installed on opposite sides of the building or structure, one on each side, that comply with Figure K103.1.
Related Code Sections
AW103.1 Areas Protected by the Facilities of the Central Valley Flood Protection Plan, Determination of Loads
Hydrostatic loads , based on the depth of water determined by the WSEL200 shall be determined in accordance with Chapter 5 of ASCE 7. Reduction ...
California Residential Code 2016 > W Areas Protected by the Facilities of the Central Valley Flood Protection Plan > AW103 Structural Stability > AW103.1 Determination of Loads
AW103.1 Areas Protected by the Facilities of the Central Valley Flood Protection Plan, Determination of Loads
Hydrostatic loads, based on the depth of water determined by the WSEL200 shall be determined in accordance with Chapter 5 of ASCE 7. Reduction ...
California Residential Code 2019 > W Areas Protected by the Facilities of the Central Valley Flood Protection Plan > AW103 Structural Stability > AW103.1 Determination of Loads
K103.2 Group R-3 and Group R-3.1 Occupancies Protected by the Facilities of the Central Valley Flood Protection Plan, Determination of Loads
Hydrostatic loads, based on the depth of water determined by the WSEL200, shall be determined in accordance with Chapter 5 of ASCE 7. Reduction ...
California Building Code 2016 (Vol 1 & 2) > K Group R-3 and Group R-3.1 Occupancies Protected by the Facilities of the Central Valley Flood Protection Plan > K103 Structural Stability > K103.2 Determination of Loads
K103.2 Group R-3 and Group R-3.1 Occupancies Protected by the Facilities of the Central Valley Flood Protection Plan, Determination of Loads
Hydrostatic loads, based on the depth of water determined by the WSEL200, shall be determined in accordance with Chapter 5 of ASCE 7.
Reduction ...
California Building Code 2019 (Vol 1 & 2) > K Group R-3 and Group R-3.1 Occupancies Protected by the Facilities of the Central Valley Flood Protection Plan > K103 Structural Stability > K103.2 Determination of Loads
220.87 Wiring and Protection, Determining Existing Loads
The calculation of a feeder or service load for existing installations shall be permitted to use actual maximum demand to determine the existing load ...
California Electrical Code 2019 > 2 Wiring and Protection > 220 Branch-Circuit, Feeder, and Service Load Calculations > 220.87 Determining Existing Loads