// CODE SNIPPET
1612.3.2 Determination of Impacts
JUMP TO FULL CODE CHAPTER
In riverine flood hazard areas where design flood elevations are specified but floodways have not been designated, the applicant shall provide a floodway analysis that demonstrates that the proposed work will not increase the design flood elevation more than 1 foot (305 mm) at any point within the jurisdiction of the applicable governing authority.
Related Code Sections
1612.3.2 Structural Design, Determination of Impacts
In riverine flood hazard areas where design flood elevations are specified but floodways have not been designated, the applicant shall provide ...
Building Code 2018 of Illinois > 16 Structural Design > 1612 Flood Loads > 1612.3 Establishment of Flood Hazard Areas > 1612.3.2 Determination of Impacts
1607.14.2 Structural Design, Vertical Impact Force
The maximum wheel loads of the crane shall be increased by the following percentages to determine the induced vertical impact or vibration force ...
Building Code 2018 of Illinois > 16 Structural Design > 1607 Live Loads > 1607.14 Crane Loads > 1607.14.2 Vertical Impact Force
1206.3 Interior Environment, Structure-Borne Sound
on a comparison of floor-ceiling assemblies having impact insulation class ratings as determined by the test procedures in ASTM E492 ...
Building Code 2018 of Illinois > 12 Interior Environment > 1206 Sound Transmission > 1206.3 Structure-Borne Sound
1504.7 Roof Assemblies and Rooftop Structures, Impact Resistance
Roof coverings installed on low-slope roofs (roof slope < 2:12) in accordance with Section 1507 shall resist impact damage based on the results ...
Building Code 2018 of Illinois > 15 Roof Assemblies and Rooftop Structures > 1504 Performance Requirements > 1504.7 Impact Resistance