// CODE SNIPPET
1910.216(f)(1) Determination of Distance of Travel
JUMP TO FULL CODE CHAPTER
All measurements on mills and calenders shall be taken with the rolls running empty at maximum operating speed. Stopping distances shall be expressed in inches of surface travel of the roll from the instant the emergency stopping device is actuated.
Related Code Sections
1910.216(f)(1) Machinery and Machine Guarding, Determination of Distance of Travel
All measurements on mills and calenders shall be taken with the rolls running empty at maximum operating speed. Stopping distances shall be expressed ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.216 Mills and Calenders in the Rubber and Plastics Industries > 1910.216(f) Stopping Limits > 1910.216(f)(1) Determination of Distance of Travel
1910.68(a)(9) Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms, Travel
The travel is the distance between the centers of the top and bottom pulleys ...
OSHA 1910 General Industry > F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms > 1910.68 Manlifts > 1910.68(a) Definitions Applicable to This Section > 1910.68(a)(9) Travel
1910.178(n) Materials Handling and Storage, Traveling
All traffic regulations shall be observed, including authorized plant speed limits. A safe distance shall be maintained approximately three truck ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.178 Powered Industrial Trucks > 1910.178(n) Traveling
1910.180(a)(44) Materials Handling and Storage, Travel
Travel means the function of the machine moving from one location to another, on a jobsite ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.180 Crawler Locomotive and Truck Cranes > 1910.180(a) Definitions Applicable to This Section > 1910.180(a)(44) Travel
1910.179(e)(3)(i) Materials Handling and Storage,
, or is not operated near the ends of bridge and trolley travel, or is restricted to a limited distance of the runway and there is no hazard of striking any ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.179 Overhead and Gantry Cranes > 1910.179(e) Stops, Bumpers, Rail Sweeps, and Guards- > 1910.179(e)(3) Trolley Bumpers- > 1910.179(e)(3)(i)