// CODE SNIPPET
406.14 Detectable Warnings at Islands or Cut-Through Medians
JUMP TO FULL CODE CHAPTER
Where detectable warnings are provided on curb ramps or at raised marked crossings leading to islands or cut-through medians, the island or cut-through median shall be provided with detectable warnings complying with Section 705, that are 24 inches (610 mm) in depth, and extend the full width of the pedestrian route or cut-through. Where such island or cut-through median is less than 48 inches (1220 mm) in depth, the entire width and depth of the pedestrian route or cut-through shall have detectable warnings.
Related Code Sections
406.14 Accessible Routes, Detectable Warnings at Islands or Cut-Through Medians
Where detectable warnings are provided on curb ramps or at raised marked crossings leading to islands or cut-through medians, the island or cut ...
Minnesota Accessibility Code 2015 > 4 Accessible Routes > 406 Curb Ramps > 406.14 Detectable Warnings at Islands or Cut-Through Medians
1109.10 Of the 2012 IBC With Minnesota Amendments, Detectable Warnings
have a detectable warning . Exception: Detectable warnings are not required at bus stops ...
Minnesota Accessibility Code 2015 > 11 Of the 2012 IBC With Minnesota Amendments > 1109 Other Features and Facilities > 1109.10 Detectable Warnings
Section 705 Communication Elements and Features, Detectable Warnings
Detectable warning surfaces shall comply with Section 705 ...
805.5.2 Special Rooms and Spaces, Detectable Warnings
Platform boarding edges not protected by platform screens or guards shall have a detectable warning complying with Section 705 ...
Minnesota Accessibility Code 2015 > 8 Special Rooms and Spaces > 805 Transportation Facilities > 805.5 Rail Platforms > 805.5.2 Detectable Warnings
2403.2.7 Flammable Finishes, Welding Warning Signs
Welding, cutting and similar spark-producing operations shall not be conducted in or adjacent to flammable vapor areas or dipping or coating ...
2020 Minnesota State Fire Code > 24 Flammable Finishes > 2403 Protection of Operations > 2403.2 Sources of Ignition > 2403.2.7 Welding Warning Signs