// CODE SNIPPET
103.6 Design Values for Existing Materials and Construction
JUMP TO FULL CODE CHAPTER
The incorporation of existing materials, construction and detailing into the structural system shall be permitted when approved by the code enforcement official. Minimum quality levels and maximum strength values shall comply with this code.
Related Code Sections
103.6 General Requirements, Design Values for Existing Materials and Construction
The incorporation of existing materials, construction and detailing into the structural system shall be permitted when approved by the code ...
2010 Existing Building Code of NY > 1 General Requirements > 103 Materials, Equipment and Methods of Construction > 103.6 Design Values for Existing Materials and Construction
Section A406 Earthquake Hazard Reduction in Existing Wood-Frame Residential Buildings With Soft, Weak or Open-Front Walls, Materials of Construction
shall apply. A406.3 Existing materials. All existing materials shall be in sound condition and constructed in general conformance to the Building ...
2010 Existing Building Code of NY > A4 Earthquake Hazard Reduction in Existing Wood-Frame Residential Buildings With Soft, Weak or Open-Front Walls > A406 Materials of Construction
Section A405 Earthquake Risk Reduction in Wood-Frame Residential Buildings With Soft, Weak or Open Front Walls, Materials of Construction
materials shall be taken into account in any analysis required by this chapter. The verification of existing materials conditions and their conformance ...
Existing Building Code 2015 of New York State > A4 Earthquake Risk Reduction in Wood-Frame Residential Buildings With Soft, Weak or Open Front Walls > A405 Materials of Construction
Section A405 Guidelines for the Seismic Retrofit of Existing Buildings, Materials of Construction
materials shall be taken into account in any analysis required by this chapter. The verification of existing materials conditions and their conformance ...
2020 Existing Building Code of NYS > A Guidelines for the Seismic Retrofit of Existing Buildings > A405 Materials of Construction
401.2 Prescriptive Compliance Method, Building Materials and Systems
Where the existing seismic force-resisting system is a type that can be designated ordinary, values of R , Ω 0 and C d for the existing seismic ...
Existing Building Code 2015 of New York State > 4 Prescriptive Compliance Method > 401 General > 401.2 Building Materials and Systems