// CODE SNIPPET
Section 2302 Design Requirements
JUMP TO FULL CODE CHAPTER
The design of structural elements or systems, constructed partially or wholly of wood or wood-based products, shall be in accordance with one of the following methods:
- Allowable stress design in accordance with Sections 2304, 2305 and 2306.
- Load and resistance factor design in accordance with Sections 2304, 2305 and 2307.
- Conventional light-frame construction in accordance with Sections 2304 and 2308.
- AWC WFCM in accordance with Section 2309.
- The design and construction of log structures in accordance with the provisions of ICC 400.
Related Code Sections
Section 2302 Wood, Design Requirements
The design of structural elements or systems, constructed partially or wholly of wood or wood-based products, shall be in accordance with one ...
Section 2302 Wood, Design Requirements
The design of structural elements or systems, constructed partially or wholly of wood or wood-based products, shall be in accordance with one ...
26.10.1 Special Occupancy Requirements, Design Requirements
be designed in accordance with the requirements of this standard using Extra Hazard Group 1 with a minimum design area of 2500 ft 2 for the entire MATS ...
Standard for the Installation of Sprinkler Systems 2019 of Illinois > 26 Special Occupancy Requirements > 26.10 Acetylene Cylinder Charging Plants > 26.10.1 Design Requirements
26.12.1 Special Occupancy Requirements, Design Requirements
The design of fire water supply and distribution systems, where used, shall provide for the simultaneous supply of those fixed fire protection ...
Standard for the Installation of Sprinkler Systems 2019 of Illinois > 26 Special Occupancy Requirements > 26.12 Utility LP-gas Plants > 26.12.1 Design Requirements
26.13.1 Special Occupancy Requirements, Design Requirements
nozzles, at their design flow and pressure, involved in the maximum single incident expected in the plant plus an allowance of 1000 gpm (3800 lpm ...
Standard for the Installation of Sprinkler Systems 2019 of Illinois > 26 Special Occupancy Requirements > 26.13 Production, Storage, and Handling of Liquefied Natural Gas (LNG) > 26.13.1 Design Requirements