// CODE SNIPPET
2308.4 Design of Portions
JUMP TO FULL CODE CHAPTER
Where a building of otherwise conventional construction contains non-conventional structural elements, those elements shall be designed to resist the forces specified in Chapter 16. The extent of such design need only demonstrate compliance of non-conventional elements with other applicable provisions of this code, and shall be compatible with the performance of the conventional framed system.
Related Code Sections
2308.4 Wood, Design of Portions
Where a building of otherwise conventional construction contains non-conventional structural elements, those elements shall be designed to resist ...
NYC Building Code 2008 > 23 Wood > 2308 Conventional Light-Frame Construction > 2308.4 Design of Portions
Section 1601 Structural Design, General
The provisions of this chapter shall govern the structural design of buildings, structures and portions thereof regulated by this code ...
1810.8.3.1 Soils and Foundations, Reinforcement
shall be designed to carry at least 40 percent of the design compression load. Micropiles or portions thereof grouted in an open hole in soil without ...
NYC Building Code 2014 > 18 Soils and Foundations > 1810 Cast-In-Place Concrete Piles > 1810.8 Micropiles > 1810.8.3 Design > 1810.8.3.1 Reinforcement
1601.1 Structural Design, Scope
The provisions of this chapter shall govern the structural design of buildings, structures and portions thereof regulated by this code. (Note ...
1617.6.1.2 Structural Design, ASCE 7, Section 9.5.2.2.2.1
:
3.1 The flexible upper portion shall be designed as a separate structure using the appropriate values of R and r .
3.2 The rigid lower ...
NYC Building Code 2008 > 16 Structural Design > 1617 Earthquake Loads — Minimum Designlateral Force and Related Effects > 1617.6 Seismic-Force-Resisting Systems > 1617.6.1 Modifications to ASCE 7, Section 9.5.2.2 > 1617.6.1.2 ASCE 7, Section 9.5.2.2.2.1