// CODE SNIPPET
Section 1802 Design Basis
JUMP TO FULL CODE CHAPTER
Allowable bearing pressures, allowable stresses and design formulas provided in this chapter shall be used with the allowable stress design load combinations specified in Section 1605.3. The quality and design of materials used structurally in excavations and foundations shall comply with the requirements specified in Chapters 16, 19, 21, 22 and 23. Excavations and fills shall comply with Chapter 33.
Related Code Sections
Section 1802 Soils and Foundations, Design Basis
Allowable bearing pressures, allowable stresses and design formulas provided in this chapter shall be used with the allowable stress design load ...
1607.6 Structural Design, Helipads
not be reduced. 1.1. 40 psf (1.92 kN/m 2 ) where the design basis helicopter has a maximum take-off weight of 3,000 pounds (13.35 kN) or less. 1.2. 60 psf ...
1905.1.1 Concrete, ACI 318, Section 2.3
for the design-basis earthquake, as specified by Section 12.8.6 of ASCE 7. DETAILED PLAIN CONCRETE STRUCTURAL WALL. A wall complying ...
Building Code 2018 of Illinois > 19 Concrete > 1905 Modifications to ACI 318 > 1905.1 General > 1905.1.1 ACI 318, Section 2.3
1810.1.1 Soils and Foundations, Geotechnical Investigation
Deep foundations shall be designed and installed on the basis of a geotechnical investigation as set forth in Section 1803 ...
Building Code 2018 of Illinois > 18 Soils and Foundations > 1810 Deep Foundations > 1810.1 General > 1810.1.1 Geotechnical Investigation
8.6.2.2 Two-Way Slabs,
times the cracking load calculated on the basis of f r defined in 19.2.3 ...
Building Code Requirements for Structural Concrete of Illinois > 8 Two-Way Slabs > 8.6 Reinforcement Limits > 8.6.2 Minimum Flexural Reinforcement in Prestressed Slabs > 8.6.2.2