// CODE SNIPPET
102.1 Design and Installation Provisions
JUMP TO FULL CODE CHAPTER
The design and installation provisions of this code shall apply to:
- Facilities established and conditions arising on or after the effective date of this code.
- Facilities and conditions not lawfully existing prior to the effective date of this code.
- Facilities and conditions lawfully existing prior to the effective date of this code, except as otherwise provided in FC 102.3, 102.4 and 102.5.
Related Code Sections
503.3.2 Chimneys and Vents, Design and Construction
Appliances required to be vented shall be connected to a venting system designed and installed in accordance with the provisions of Sections 503.4 ...
NYC Fuel Gas Code 2014 > 5 Chimneys and Vents > 503 Venting of Appliances > 503.3 Design and Construction > 503.3.2 Design and Construction
503.3.2 Chimneys and Vents, Design and Construction
Gas utilization equipment required to be vented shall be connected to a venting system designed and installed in accordance with the provisions ...
NYC Fuel Gas Code 2008 > 5 Chimneys and Vents > 503 Venting of Equipment > 503.3 Design and Construction > 503.3.2 Design and Construction
102.3 Administration, Maintenance
Installations, both existing and new, and parts thereof shall be maintained in proper operating condition in accordance with the original design ...
102.3 Administration, Maintenance
designated agent shall be responsible for maintenance of installations. To determine compliance with this provision, the commissioner shall have ...
611.7 Specific Appliances, Relief Opening
The design of the installation shall include provisions to permit nonrecirculating direct-fired industrial air heaters to operate at rated capacity ...
NYC Fuel Gas Code 2014 > 6 Specific Appliances > 611 Nonrecirculating Direct-Fired Industrial Air Heaters > 611.7 Relief Opening