// CODE SNIPPET
77-25 Density Requirements
JUMP TO FULL CODE CHAPTER
Whenever a zoning lot is divided by a boundary between districts with different density requirements, the maximum number of dwelling units or rooming units permitted on the zoning lot shall equal the sum of the maximum number of dwelling units or rooming units permitted for each portion of the zoning lot in accordance with the applicable district regulations. Such dwelling units or rooming units may be located wherever a building is permitted on the zoning lot. However, for portions of zoning lots in R1, R2, R3-1, R3A, R3X, R4-1, R4A, R4B or R5A Districts, no more than one or two dwelling units may be provided, as applicable.
Related Code Sections
721.5.1.3.2 Fire and Smoke Protection Features, Identification
Spray-applied fire-resistant materials shall be identified by density and thickness required for a given fire-resistance rating ...
NYC Building Code 2014 > 7 Fire and Smoke Protection Features > 721 Calculated Fire Resistance > 721.5 Steel Assemblies > 721.5.1 Structural Steel Columns > 721.5.1.3 Spray-Applied Fire-Resistant Materials > 721.5.1.3.2 Identification
721.5.1.3.2 Fire-Resistance-Rated Construction, Spray-Applied Identification
Spray-applied fire-resistant materials shall be identified by density and thickness required for a given fire-resistance rating ...
NYC Building Code 2008 > 7 Fire-Resistance-Rated Construction > 721 Calculated Fire Resistance > 721.5 Steel Assemblies > 721.5.1 Structural Steel Columns > 721.5.1.3 Spray-Applied Fire-Resistant Materials > 721.5.1.3.2 Spray-Applied Identification
2605.2 Plastic, Exterior Use
by a minimum of 4 feet (1219 mm) vertically. Exception: The area and separation requirements and the smoke-density limitation are not applicable ...
2605.2 Plastic, Exterior Use
) in area and shall be separated by a minimum of 4 feet (1219 mm) vertically. Exception: The area and separation requirements and the smoke-density ...
402.14.5.1 Special Detailed Requirements Based on Use and Occupancy, Density
The minimum density of foam plastics used in signs shall not be less than 20 pounds per cubic foot (pcf) (320 kg/m 3 ) ...
NYC Building Code 2008 > 4 Special Detailed Requirements Based on Use and Occupancy > 402 Covered Mall Buildings > 402.14 Plastic Signs > 402.14.5 Foam Plastics > 402.14.5.1 Density