// CODE SNIPPET
43-623 Density in M1-6D Districts
JUMP TO FULL CODE CHAPTER
The provisions of 35-40 (APPLICABILITY OF DENSITY REGULATIONS TO MIXED BUILDINGS) shall apply. The applicable factor shall be 680.
Related Code Sections
1704.11.4 Structural Tests and Special Inspections, Density
The density of the sprayed fire-resistant material shall not be less than the density specified in the approved fire-resistant design. Density ...
NYC Building Code 2008 > 17 Structural Tests and Special Inspections > 1704 Special Inspections > 1704.11 Sprayed Fire-Resistant Materials > 1704.11.4 Density
1704.11.5 Structural Tests and Special Inspections, Density
The density of the sprayed fire-resistant material shall not be less than the density specified in the approved fire-resistance design. Density ...
NYC Building Code 2014 > 17 Structural Tests and Special Inspections > 1704 Special Inspections > 1704.11 Sprayed Fire-Resistant Materials > 1704.11.5 Density
2604.2.1 Plastic, Density
The minimum density of the interior trim shall be 20 pcf (320 kg/m 3 ) ...
NYC Building Code 2008 > 26 Plastic > 2604 Interior Finish and Trim > 2604.2 Foam Plastic Interior Trim > 2604.2.1 Density
2604.2.1 Plastic, Density
The minimum density of the interior trim shall be 20 pcf (320 kg/m 3 ) ...
NYC Building Code 2014 > 26 Plastic > 2604 Interior Finish and Trim > 2604.2 Foam Plastic Interior Trim > 2604.2.1 Density
402.14.5.1 Special Detailed Requirements Based on Use and Occupancy, Density
The minimum density of foam plastics used in signs shall not be less than 20 pounds per cubic foot (pcf) (320 kg/m 3 ) ...
NYC Building Code 2008 > 4 Special Detailed Requirements Based on Use and Occupancy > 402 Covered Mall Buildings > 402.14 Plastic Signs > 402.14.5 Foam Plastics > 402.14.5.1 Density