// CODE SNIPPET
[F] 2604.2.1 Density
Related Code Sections
1705.14.5 Special Inspections and Tests, Density
The density of the sprayed fire-resistant material shall be not less than the density specified in the approved fire-resistance design. Density ...
Building Code 2018 of Illinois > 17 Special Inspections and Tests > 1705 Required Special Inspections and Tests > 1705.14 Sprayed Fire-Resistant Materials > 1705.14.5 Density
2604.2.1 Plastic, Density
The minimum density of the interior trim shall be 20 pcf (320 kg/m 3 ) ...
Building Code 2018 of Illinois > 26 Plastic > 2604 Interior Finish and Trim > 2604.2 Interior Trim > 2604.2.1 Density
402.6.4.5.1 Special Detailed Requirements Based on Occupancy and Use, Density
The density of foam plastics used in signs shall be not less than 20 pounds per cubic foot (pcf) (320 kg/ m 3 ) ...
Building Code 2018 of Illinois > 4 Special Detailed Requirements Based on Occupancy and Use > 402 Covered Mall and Open Mall Buildings > 402.6 Interior Finishes and Features > 402.6.4 Plastic Signs > 402.6.4.5 Foam Plastics > 402.6.4.5.1 Density
(A) Equipment for General Use, Watt Density
Panels or units shall not exceed 1300 watts/m 2 (120 watts/ft 2 ) of heated area ...
National Electrical Code 2017 of Illinois > 4 Equipment for General Use > 426 Fixed Outdoor Electric Deicing and Snow-Melting Equipment > 426.20 Embedded Deicing and Snow-Melting Equipment > (A) Watt Density
C3.5.10 Normative Appendix C Methodology for Building Envelope Trade-Off Option in Section 5.6, Occupant Density
The occupant density shall be modeled according to the peak occupant density and the occupancy rate schedule in the building envelope trade-off ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Illinois > Normative Appendix C Methodology for Building Envelope Trade-Off Option in Section 5.6 > C3 Simulation General Requirements > C3.5 Calculation of Proposed Envelope Performance Factor > C3.5.10 Occupant Density