• Codes
  • Features
  • Pricing
  • Login
  • Sign Up
Sign Up
Login
  • Code Library
  • Features
  • Pricing
  • About
  • Careers
  • Contact
  • Terms
  • Privacy
Sign Up
Upgrade to premium.
Simplify code analysis.


START 2 WEEK FREE TRIAL LEARN ABOUT PREMIUM
// CODE SNIPPET

1910.184(e)(9) Deformed attachments

OSHA 1910 General Industry > N Materials Handling and Storage > 1910.184 Slings > 1910.184(e) Alloy steel chain slings > 1910.184(e)(9) Deformed attachments
JUMP TO FULL CODE CHAPTER

1910.184(e)(9)(i)

Alloy steel chain slings with cracked or deformed master links, coupling links or other components shall be removed from service.


Table N-184-1-Minimum Allowable Chain Size At Any Point of Link
Chain size, inches Minimum allowable
chain size, inches
1/4 13/64
3/8 19/64
1/2 25/64
5/8 31/64
3/4 19/32
7/8 45/64
1 13/16
11/8 29/32
11/4 1
13/8 13/32
11/2 13/16
13/4 113/32

1910.184(e)(9)(ii)

Slings shall be removed from service if hooks are cracked, have been opened more than 15 percent of the normal throat opening measured at the narrowest point or twisted more than 10 degrees from the plane of the unbent hook.
Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.
Share URL

Copy and paste the link below into emails, chats or browsers.

Copy

You can also copy or bookmark the link from your browser's address bar.


Copy Section Text

Copy with citation
P Premium Feature

This feature is included in premium subscriptions only. Click below to start a free trial.

Start Free Trial

Related Code Sections


1910.184(e)(9) Materials Handling and Storage, Deformed attachments
Alloy steel chain slings with cracked or deformed master links, coupling links or other components shall be removed from ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.184 Slings > 1910.184(e) Alloy steel chain slings > 1910.184(e)(9) Deformed attachments
1910.304(b)(3)(ii)(C)(3) Electrical,
Each cord set, attachment cap, plug, and receptacle of cord sets, and any equipment connected by cord and plug, except cord sets and receptacles ...
OSHA 1910 General Industry > S Electrical > 1910.304 Wiring design and protection > 1910.304(b) Branch circuits > 1910.304(b)(3) Ground-fault circuit interrupter protection for personnel > 1910.304(b)(3)(ii) > 1910.304(b)(3)(ii)(C) > 1910.304(b)(3)(ii)(C)(3)
1910.334(a)(2) Electrical, Visual inspection
defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage ...
OSHA 1910 General Industry > S Electrical > 1910.334 Use of equipment > 1910.334(a) Portable electric equipment > 1910.334(a)(2) Visual inspection
1910.184(e)(2) Materials Handling and Storage, Attachments
Hooks, rings, oblong links, pear shaped links, welded or mechanical coupling links or other attachments shall have a rated capacity at least equal ...
OSHA 1910 General Industry > N Materials Handling and Storage > 1910.184 Slings > 1910.184(e) Alloy steel chain slings > 1910.184(e)(2) Attachments
1910.263(l)(9)(viii) Special Industries,
Explosion doors which have a substantial weight shall be attached by chains or similar means to prevent flying parts from ...
OSHA 1910 General Industry > R Special Industries > 1910.263 Bakery equipment > 1910.263(l) Ovens > 1910.263(l)(9) General requirements > 1910.263(l)(9)(viii)
Calculate Code Requirements

Code Calculators automatically generate a detailed list of requirements.

Upgrade to premium to access these features.


LEARN MORE
About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.


Find Your Codes
Contact Us Privacy Terms