// CODE SNIPPET
§27-650 Deflection of Support
JUMP TO FULL CODE CHAPTER
The deflection of members supporting glass panels under the design wind load (measured perpendicular to the plane of the panel) shall not exceed L/175, where L is the span of the supporting member. In no case shall such deflection exceed three-quarters of an inch.
Related Code Sections
§27-650 Structural Work, Deflection of Support
The deflection of members supporting glass panels under the design wind load (measured perpendicular to the plane of the panel) shall not exceed L ...
1817.5.5 Soils and Foundations, Anticipated Deflection
A calculation shall be performed for the anticipated deflection of the method of support system and its effect on the supported building ...
NYC Building Code 2022 > 18 Soils and Foundations > 1817 Underpinning and Alternate Methods of Support of Buildings and Adjacent Property > 1817.5 Design Requirements > 1817.5.5 Anticipated Deflection
2110.4.2 Masonry, Vertical
Maximum total deflection of structural members supporting glass unit masonry shall not exceed 1 / 600 ...
2.23.5.2 Electric Elevators, Brackets, Fastenings, and Supports
imposed by the class of loading (see 2.16.2.2 and 8.2.2.6) with a total deflection at the point of support not in excess of 3 mm (0.125 in.) ...
Safety Code for Elevators and Escalators 2013 of New York City > 2 Electric Elevators > 2.23 Car and Counterweight Guide Rails, Guide-Rail Supports, and Fastenings > 2.23.5 Stresses and Deflections > 2.23.5.2 Brackets, Fastenings, and Supports
8.4.8.4.1 General Requirements,
by the seismic loads specified in 8.4.8.2.6, with a total deflection at the point of support not to exceed 6 mm (0.25 in.) ...
Safety Code for Elevators and Escalators 2013 of New York City > 8 General Requirements > 8.4 Elevator Seismic Requirements > 8.4.8 Car and Counterweight Guide-Rail Systems > 8.4.8.4 Brackets, Fastenings, and Supports > 8.4.8.4.1