// CODE SNIPPET
411.1.3 Deep Area
JUMP TO FULL CODE CHAPTER
The means of entry and exit in the deep area of pools shall consist of one of the following:
- Steps/stairs.
- Ladders.
- Grab rails with recessed treads.
- Ramps.
- Beach entries.
- Swimouts.
- Other designs that provide the minimum utility as specified in this code.
Related Code Sections
411.1.3 Public Swimming Pools, Deep Area
The means of entry and exit in the deep area of pools shall consist of one of the following: Steps/stairs. Ladders. Grab rails with recessed ...
Section 3109 of the 2015 WSBC > 4 Public Swimming Pools > 411 Special Features > 411.1 Entry and Exit > 411.1.3 Deep Area
809.4 Permanent Inground Residential Swimming Pools, Over 30 Feet in Width
Pools over 30 feet (9144 mm) in width at the deep area shall have an entry and exit on both sides of the deep area of the pool ...
Section 3109 of the 2015 WSBC > 8 Permanent Inground Residential Swimming Pools > 809 Special Features > 809.4 Over 30 Feet in Width
610.7.3 Aquatic Recreation Facilities, Not an Entry or Exit
Underwater seats and benches shall not be used as an entry or exit for a pool but can be located in shallow or deep areas of water ...
Section 3109 of the 2015 WSBC > 6 Aquatic Recreation Facilities > 610 Special Features > 610.7 Underwater Seats and Benches > 610.7.3 Not an Entry or Exit
807.1.2 Permanent Inground Residential Swimming Pools, Shallow to Deep Transition
The shallow to deep area floor slope transition point, indicated in Figure 804.1 as Point D, shall occur at a depth not less than 33 inches (838 mm ...
Section 3109 of the 2015 WSBC > 8 Permanent Inground Residential Swimming Pools > 807 Pool Floors > 807.1 Floor Slopes > 807.1.2 Shallow to Deep Transition
808.3 Permanent Inground Residential Swimming Pools, Installation
Where manufactured diving equipment is installed, the installation shall be located in the deep area of the pool so as to provide the minimum ...
Section 3109 of the 2015 WSBC > 8 Permanent Inground Residential Swimming Pools > 808 Diving Equipment > 808.3 Installation