// CODE SNIPPET
(A) Dedicated Overcurrent and Disconnect
Related Code Sections
(A) Special Conditions, Dedicated Overcurrent and Disconnect
Each source interconnection of one or more power sources installed in one system shall be made at a dedicated circuit breaker or fusible ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 705 Interconnected Electric Power Production Sources > 705.12 Load-Side Source Connections > (A) Dedicated Overcurrent and Disconnect
(A) Special Occupancies, Disconnection and Overcurrent Protection
Where dimmers are installed in ungrounded conductors, each dimmer shall have overcurrent protection not greater than 125 percent of the dimmer rating ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 520 Theaters, Audience Areas of Motion Picture and Television Studios, Performance Areas, and Similar Locations > 520.25 Dimmers > (A) Disconnection and Overcurrent Protection
Part IV Wiring and Protection, Disconnecting and Guarding
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > IV Disconnecting and Guarding
669.9 Special Equipment, Overcurrent Protection
Direct-current conductors shall be protected from overcurrent by one or more of the following: Fuses or circuit breakers A current-sensing ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 669 Electroplating > 669.9 Overcurrent Protection
368.17 Wiring Methods and Materials, Overcurrent Protection
the branch-circuit overcurrent plug-in device is directly supplying a readily accessible disconnect, a method of floor operation shall not be required ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > (2)Floors > 368.17 Overcurrent Protection