// CODE SNIPPET
1603.3.1 Data Required
JUMP TO FULL CODE CHAPTER
The following floor load data shall be shown on drawings:
- The uniform distributed design live load for each floor or part thereof.
- The weight of any piece of machinery or equipment weighing more than 1,000 pounds (4,400 N), and its identifying description and location. When this equipment includes oscillating or rotating components, the description shall indicate the frequency of such movement.
- The maximum design wheel load and total maximum weight of any vehicle that may be brought into the building.
- The equivalent uniform partition loads or, in lieu of these, a statement to the effect that the design was predicated on actual partition loads.
Related Code Sections
1603.3.1 Structural Design, Data Required
The following floor load data shall be shown on drawings: The uniform distributed design live load for each floor or part thereof. The ...
NYC Building Code 2008 > 16 Structural Design > 1603 Construction Documents > 1603.3 Live Loads Posted > 1603.3.1 Data Required
§27-564 Loads, Floor Loads to Be Posted
of this chapter. (b) Data required. The following floor load data shall be shown: (1) The uniformly distributed design live load for each floor or part thereof ...
§27-667 Foundations, Existing Borings
the specific requirements of this subchapter, but which are of suitable type and adequate penetration to provide the data required for the safe design ...
Article 14 Elevators [PDF] (page 60)
machines are used, the data plate required in section C26-1012.0 shall include the following cable information: Cable Specifications. Rated Ultimate ...
1704.8.5 Structural Tests and Special Inspections, Helical Pile Foundations
installation equipment used, pile dimensions, tip elevations, final depth, final installation torque and other pertinent installation data as required ...
NYC Building Code 2014 > 17 Structural Tests and Special Inspections > 1704 Special Inspections > 1704.8 Deep Foundation Elements > 1704.8.5 Helical Pile Foundations