// CODE SNIPPET
418.3.3 Cylinder Change
Related Code Sections
418.3.3 Ventilation Air, Cylinder Change
When not located in the ETO sterilizer equipment room, exhaust during cylinder
change is required by installing a hood that is part of a dedicated ...
Los Angeles Mechanical Code > 4 Ventilation Air > 418.0 Design Requirements for Ethylene Oxide (Eto) Sterilization Areas > 418.3 Ventilation Requirements > 418.3.3 Cylinder Change
418.3.3 Ventilation Air, Cylinder Change
When not located in the ETO
sterilizer equipment room, exhaust during cylinder change
is required by installing a hood that is part of a dedicated ...
Los Angeles Mechanical Code > 4 Ventilation Air > 418.0 Design Requirements for Ethylene Oxide (Eto) Sterilization Areas > 418.3 Ventilation Requirements > 418.3.3 Cylinder Change
418.3 Ventilation Air, Ventilation Requirements
sterilizer equipment room, exhaust during cylinder
change is required by installing a hood that is part of a dedicated ventilation exhaust system ...
Los Angeles Mechanical Code > 4 Ventilation Air > 418.0 Design Requirements for Ethylene Oxide (Eto) Sterilization Areas > 418.3 Ventilation Requirements
2308.8.1.2.2 Motor Fuel-Dispensing Facilities and Repair Garages, Cylinder Stability
A method of rigidly supporting the vessel during the venting of CNG shall be provided. The selected method shall provide not less than two points ...
2017 LA City Fire Code > 23 Motor Fuel-Dispensing Facilities and Repair Garages > 2308 Compressed Natural Gas Motor Fuel-Dispensing Facilities > 2308.8 Discharge of CNG From Motor Vehicle Fuel Storage Containers > 2308.8.1 Methods of Discharge > 2308.8.1.2 Atmospheric Venting > 2308.8.1.2.2 Cylinder Stability
3501.4 Welding and Other Hot Work, Cylinders and Containers
Compressed gas cylinders and fuel containers shall comply with this chapter and Chapter 53 ...
2017 LA City Fire Code > 35 Welding and Other Hot Work > 3501 General > 3501.4 Cylinders and Containers