// CODE SNIPPET
1012.10.1 Curb, Rail, Wall or Barrier
JUMP TO FULL CODE CHAPTER
A curb, rail, wall or barrier shall be provided to serve as edge protection. A curb shall be not less than 4 inches (102 mm) in height. Barriers shall be constructed so that the barrier prevents the passage of a 4-inch-diameter (102 mm) sphere, where any portion of the sphere is within 4 inches (102 mm) of the floor or ground surface.
Related Code Sections
1012.10.1 Means of Egress, Curb, Rail, Wall or Barrier
A curb, rail, wall or barrier shall be provided to serve as edge protection. A curb shall be not less than 4 inches (102 mm) in height. Barriers ...
Building Code 2018 of Illinois > 10 Means of Egress > 1012 Ramps > 1012.10 Edge Protection > 1012.10.1 Curb, Rail, Wall or Barrier
1005.3.1 Recreation Facilities, Curb or Barrier
Curbs or barriers shall extend 2 inches (51 mm) minimum above the surface of the fishing pier or platform ...
2018 Illinois Accessibility Code > 10 Recreation Facilities > 1005 Fishing Piers and Platforms > 1005.3 Edge Protection > 1005.3.1 Curb or Barrier
405.9.2 Accessible Routes, Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 ...
2018 Illinois Accessibility Code > 4 Accessible Routes > 405 Ramps > 405.9 Edge Protection > 405.9.2 Curb or Barrier
1006.3.2 Recreation Facilities, Barriers
Where curbs or other constructed barriers prevent golf cars from entering a fairway, openings 60 inches (1525 mm) wide minimum shall be provided ...
2018 Illinois Accessibility Code > 10 Recreation Facilities > 1006 Golf Facilities > 1006.3 Golf Car Passages > 1006.3.2 Barriers
1029.16.4 Means of Egress, Rails
Where mid-aisle handrails are provided in stepped aisles, there shall be an additional rail located approximately 12 inches (305 mm) below ...
Building Code 2018 of Illinois > 10 Means of Egress > 1029 Assembly > 1029.16 Handrails > 1029.16.4 Rails