// CODE SNIPPET
1910.262(dd)(2) Crown Wheel and Roller Gear Nip Protection
JUMP TO FULL CODE CHAPTER
The engraved roller gears and the large crown wheel shall be provided with a protective disc which will enclose the nips of the in-running gears. Individual discs for each nip will be acceptable.
Related Code Sections
1910.262(dd)(2) Special Industries, Crown Wheel and Roller Gear Nip Protection
The engraved roller gears and the large crown wheel shall be provided with a protective disc which will enclose the nips of the in-running gears ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(dd) Printing Machine (Roller Type) > 1910.262(dd)(2) Crown Wheel and Roller Gear Nip Protection
1910.261(k)(12) Special Industries, Dryer Gears
Dryer gears shall be guarded excepting where the oilers' walkway is removed out of reach of the gears' nips and spokes and hot pipes in accordance ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(k) Machine Room > 1910.261(k)(12) Dryer Gears
1910.219(f) Machinery and Machine Guarding, Gears, Sprockets, and Chains
Gears shall be guarded in accordance with one of the following methods ...
OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.219 Mechanical Power-Transmission Apparatus > 1910.219(f) Gears, Sprockets, and Chains
1910.261(k)(26) Special Industries, Inrunning Nip
Where the nipping points of all drum winders and rewinders is on the operator's side, it shall be guarded by barrier guards interlocked ...
OSHA 1910 General Industry > R Special Industries > 1910.261 Pulp, Paper, and Paperboard Mills > 1910.261(k) Machine Room > 1910.261(k)(26) Inrunning Nip
1910.262(h)(1)(v) Special Industries, Nip Guards
All nip guards shall comply with the requirements of paragraph (h)(2)(iv) of this section ...
OSHA 1910 General Industry > R Special Industries > 1910.262 Textiles > 1910.262(h) Slashers > 1910.262(h)(1) Cylinder Dryers > 1910.262(h)(1)(v) Nip Guards