// CODE SNIPPET
E3906.10 Covers and Plates
JUMP TO FULL CODE CHAPTER
Covers and plates shall be nonmetallic
or metal. Metal covers and plates shall be grounded.
[314.25(A)]
Related Code Sections
E3906.10 Power and Lighting Distribution, Covers and Plates
Covers and plates shall be nonmetallic
or metal. Metal covers and plates shall be grounded.
[314.25(A)] ...
2015 Michigan Residential Code > 39 Power and Lighting Distribution > E3906 Installation of Boxes, Conduit Bodies and Fittings > E3906.10 Covers and Plates
M1308.2 General Mechanical System Requirements, Protection Against Physical Damage
will be attached, the pipe shall be protected
by shield plates that cover the width of the pipe and
the framing member and that extend 2 inches (51 mm) to
each ...
2015 Michigan Residential Code > 13 General Mechanical System Requirements > M1308 Mechanical Systems Installation > M1308.2 Protection Against Physical Damage
G2415.7 Fuel Gas, (404.7) Protection Against Physical Damage
or floor membranes will be attached, the pipe
shall be protected by shield plates that cover the width of
the pipe and the framing member and that extend ...
2015 Michigan Residential Code > 24 Fuel Gas > G2415 (404) Piping System Installation > G2415.7 (404.7) Protection Against Physical Damage
E4002.5 Devices and Luminaires, Position of Receptacle Faces
(0.381 mm) from metal face plates. Faceplates shall be
installed so as to completely cover the opening and seat against
the mounting surface ...
2015 Michigan Residential Code > 40 Devices and Luminaires > E4002 Receptacles > E4002.5 Position of Receptacle Faces
602.4.5 Types of Construction, Roof Framing
by a continuous wood cover plate of not
less than 2 inches (51 mm) nominal in thickness secured to
the underside of the members. Splice plates shall ...
2015 Michigan Building Code > 6 Types of Construction > 602 Construction Classification > 602.4 Type IV > 602.4.5 Roof Framing