// CODE SNIPPET

1926.405(g)(2)(v) Cords Passing Through Holes

OSHA 1926 Construction > K Electrical > 1926.405 Wiring Methods, Components, and Equipment for General Use > 1926.405(g) Flexible Cords and Cables > 1926.405(g)(2) Identification, Splices, and Terminations > 1926.405(g)(2)(v) Cords Passing Through Holes

Go To Full Code Chapter

Flexible cords and cables shall be protected by bushings or fittings where passing through holes in covers, outlet boxes, or similar enclosures.

Upcodes Diagrams

Related Code Sections

1926.405(g)(2)(v) Electrical, Cords Passing Through Holes

Flexible cords and cables shall be protected by bushings or fittings where passing through holes in covers, outlet boxes, or similar enclosures ...

1926.501(b)(4) Fall Protection, "Holes"

Each employee on walking/working surfaces shall be protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower ...

OSHA 1926 Construction > M Fall Protection > 1926.501 Duty to Have Fall Protection > 1926.501(b) > 1926.501(b)(4) "Holes"

1926.405(g)(1)(iii) Electrical, Prohibited Uses

; Where run through holes in walls, ceilings, or floors ...

OSHA 1926 Construction > K Electrical > 1926.405 Wiring Methods, Components, and Equipment for General Use > 1926.405(g) Flexible Cords and Cables > 1926.405(g)(1) Use of Flexible Cords and Cables > 1926.405(g)(1)(iii) Prohibited Uses

1926.908 Blasting and the Use of Explosives, Use of Detonating Cord

Care shall be taken to select a detonating cord consistent with the type and physical condition of the bore hole and stemming and the type ...

OSHA 1926 Construction > U Blasting and the Use of Explosives > 1926.908 Use of Detonating Cord

1926.405(g)(1) Electrical, Use of Flexible Cords and Cables

; Where run through holes in walls, ceilings, or floors ...