// CODE SNIPPET
(F) Cord-And Plug-Connected Loads
JUMP TO FULL CODE CHAPTER
Where a snap switch or control device is used to control cord-and-plug-connected equipment on a general-purpose branch circuit, each snap switch or control device controlling receptacle outlets or cord connectors that are supplied by permanently connected cord pendants shall be rated at not less than the rating of the maximum permitted ampere rating or setting of the overcurrent device protecting the receptacles or cord connectors, as provided in 210.21(B).
Informational Note: See 210.50(A) and 400.10(A)(1) for equivalency to a receptacle outlet of a cord connector that is supplied by a permanently connected cord pendant.
Exception: Where a snap switch or control device is used to control not more than one receptacle on a branch circuit, the switch or control device shall be permitted to be rated at not less than the rating of the receptacle.
Related Code Sections
(F) Equipment for General Use, Cord-And Plug-Connected Loads
Where a snap switch or control device is used to control cord-and-plug-connected equipment on a general-purpose branch circuit, each snap switch ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 404 Switches > 404.14 Rating and Use of Switches > (F) Cord-And Plug-Connected Loads
(2) Wiring and Protection, Total Cord-And-Plug-Connected Load
Where connected to a branch circuit supplying two or more receptacles or outlets, a receptacle shall not supply a total cord-and-plug-connected load ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 210 Branch Circuits > 210.21 Outlet Devices > (B) Receptacles > (2) Total Cord-And-Plug-Connected Load
(C) Equipment for General Use, Cord-And Plug-Connected
Where a motor is connected to a branch circuit by means of an attachment plug and a receptacle or a cord connector, and individual overload ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.42 Motors on General-Purpose Branch Circuits > (C) Cord-And Plug-Connected
(1) Special Occupancies, Cord-And-Plug-Connected
Cord-and-plug connections shall comply with 551.47(P)(1)(a) through (P)(1)(d).
(a) That portion of a branch circuit that is installed ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 551 Recreational Vehicles and Recreational Vehicle Parks > 551.47 Wiring Methods > (P) Method of Connecting Expandable Units > (1) Cord-And-Plug-Connected
(1) Special Occupancies, Cord-And-Plug Connected
Cord-and-plug connections shall comply with 552.48(0)(1)(a) through (0)(1)(d). (a) The portion of a branch circuit that is installed ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 552 Park Trailers > 552.48 Wiring Methods > (O) Method of Connecting Expandable Units > (1) Cord-And-Plug Connected