// CODE SNIPPET
P3003.10 Copper Pipe
JUMP TO FULL CODE CHAPTER
Joints between copper or copper-alloy pipe or fittings shall comply with Sections P3003.10.1 through P3003.10.4.
All joint surfaces shall be cleaned. An approved flux shall be applied where required. The joint shall be brazed with a filler metal conforming to AWS A5.8.
Mechanical joints shall be installed in accordance with the manufacturer's instructions.
Solder joints shall be made in accordance with the methods of ASTM B 828. All cut tube ends shall be reamed to the full inside diameter of the tube end. All joint surfaces shall be cleaned. A flux conforming to ASTM B 813 shall be applied. The joint shall be soldered with a solder conforming to ASTM B 32.
Threads shall conform to ASME B1.20.1. Pipe-joint compound or tape shall be applied on the male threads only.
Related Code Sections
P3003.10 Sanitary Drainage, Copper Pipe
Joints between copper or copper-alloy pipe or fittings shall comply with Sections P3003.10.1 through P3003.10.4 ...
Residential Code 2012 of South Holland > 30 Sanitary Drainage > P3003 Joints and Connections > P3003.10 Copper Pipe
P3003.13.2 Sanitary Drainage, Copper Pipe or Tubing to Galvanized Steel Pipe
Joints between copper pipe or tubing and galvanized steel pipe shall be made with a copper-alloy or dielectric fitting. The copper tubing shall ...
Residential Code 2018 of South Holland > 30 Sanitary Drainage > P3003 Joints and Connections > P3003.13 Joints Between Different Materials > P3003.13.2 Copper Pipe or Tubing to Galvanized Steel Pipe
1107.5.2 Refrigeration, Copper and Copper-Alloy Pipe
Standard iron-pipe size, copper and copper-alloy (not less than 80-percent copper) pipe shall conform to ASTM B42 and ASTM B43 ...
Mechanical Code 2018 of South Holland > 11 Refrigeration > 1107 Refrigerant Piping > 1107.5 Materials for Refrigerant Pipe and Tubing > 1107.5.2 Copper and Copper-Alloy Pipe
1203.5 Hydronic Piping, Copper or Copper-Alloy Pipe
Joints between copper or copper-alloy pipe or fittings shall be brazed, mechanical, soldered, threaded or welded joints conforming to Section 1203.3 ...
Mechanical Code 2018 of South Holland > 12 Hydronic Piping > 1203 Joints and Connections > 1203.5 Copper or Copper-Alloy Pipe
1203.7 Hydronic Piping, Copper or Copper-Alloy Pipe
Joints between copper or copper-alloy pipe or fittings shall be brazed, mechanical, soldered, threaded or welded joints conforming to Section 1203.3 ...
Mechanical Code 2012 of South Holland > 12 Hydronic Piping > 1203 Joints and Connections > 1203.7 Copper or Copper-Alloy Pipe