// CODE SNIPPET
709.3 Conversion of GPM Flow to Dfu Values
JUMP TO FULL CODE CHAPTER
Where discharges to a waste receptor or to a drainage system are only known in gallons per minute (liters per second) values, the drainage fixture unit values for those flows shall be computed on the basis that 1 gpm (0.06 L/s) of flow is equivalent to two drainage fixture units.
Related Code Sections
709.3 Sanitary Drainage, Conversion of GPM Flow to Dfu Values
unit values for those flows shall be computed on the basis that 1 gpm (0.06 L/s) of flow is equivalent to two drainage fixture units ...
Plumbing Code 2018 of Utah > 7 Sanitary Drainage > 709 Fixture Units > 709.3 Conversion of GPM Flow to Dfu Values
709.1 Sanitary Drainage, Values for Fixtures
to a bathroom group, add the dfu value of those additional fixtures to the bathroom group fixture count.
See Section 406.2 for sizing requirements for fixture ...
P2903.6 Water Supply and Distribution, Determining Water Supply Fixture Units
The fixture unit value 2.5 assumes a flow demand of 2.5 gpm, such as for an individual lawn sprinkler device. If a hose bibb or sill cock ...
Residential Code 2015 of Utah > 29 Water Supply and Distribution > P2903 Water Supply System > P2903.6 Determining Water Supply Fixture Units
5003.1.2 Hazardous Materials—General Provisions, Conversion
Where quantities are indicated in pounds and where the weight per gallon of the liquid is not provided to the fire code official , a conversion ...
Fire Code 2018 of Utah > 50 Hazardous Materials—General Provisions > 5003 General Requirements > 5003.1 Scope > 5003.1.2 Conversion