// CODE SNIPPET
1926.761(c)(3) Controlled Decking Zone Procedures
JUMP TO FULL CODE CHAPTER
Where CDZs are being used, the employer shall assure that each employee has been provided training in the following areas:
The nature of the hazards associated with work within a controlled decking zone; and
Related Code Sections
1926.761(c)(3) Steel Erection, Controlled Decking Zone Procedures
: The nature of the hazards associated with work within a controlled decking ...
OSHA 1926 Construction > R Steel Erection > 1926.761 Training > 1926.761(c) Special Training Programs > 1926.761(c)(3) Controlled Decking Zone Procedures
1926.760(c) Steel Erection, Controlled Decking Zone (CDZ)
A controlled decking zone may be established in that area of the structure over 15 and up to 30 feet above a lower level where metal decking ...
OSHA 1926 Construction > R Steel Erection > 1926.760 Fall Protection > 1926.760(c) Controlled Decking Zone (CDZ)
1926.65(d) Occupational Health and Environmental Controls, Site Control
—
Appropriate site control procedures shall ...
OSHA 1926 Construction > D Occupational Health and Environmental Controls > 1926.65 Hazardous Waste Operations and Emergency Response > 1926.65(d) Site Control
1926.754(c)(2) Steel Erection, Installation of Shear Connectors on Composite Floors, Roofs and Bridge Decks
a controlled decking zone (CDZ), as specified in § 1926.760(c)(8) ...
OSHA 1926 Construction > R Steel Erection > 1926.754 Structural Steel Assembly > 1926.754(c) Walking/Working Surfaces -- Shear Connectors and Other Similar Devices > 1926.754(c)(2) Installation of Shear Connectors on Composite Floors, Roofs and Bridge Decks
1926.761(c) Steel Erection, Special Training Programs
nature of the hazards associated with work within a controlled decking zone ...
OSHA 1926 Construction > R Steel Erection > 1926.761 Training > 1926.761(c) Special Training Programs