UpCodes logo
Go To Full Code Chapter
Switches, flashers, and similar devices controlling transformers and electronic power supplies shall be rated for controlling inductive loads or have a current rating not less than twice the current rating of the transformer or the electronic power supply.

Related Code Sections

(B) Special Equipment, Control Switch Rating
Switches, flashers, and similar devices controlling transformers and electronic power supplies shall be rated for controlling inductive loads or have ...
(B) Special Equipment, Control Switch Rating
Switches, flashers, and similar devices controlling transformers and electronic power supplies shall be rated for controlling inductive loads or have ...
404.14 Equipment for General Use, Rating and Use of Switches
for controlling the following: Resistive and inductive loads not exceeding the ampere rating of the switch at the voltage applied Tungsten-filament lamp loads ...
404.14 Equipment for General Use, Rating and Use of Switches
Switches shall be listed and used within their ratings. Switches of the types covered in 404.14(A) through (E) shall be limited to the control ...
552.52 Special Occupancies, Switches
or horsepower ratings, or both, adequate for loads controlled. (An ac general-use snap switch shall be permitted to control a motor 2 hp or less with full ...