// CODE SNIPPET
R703.6.1.1 Control Joints and Expansion Joints
JUMP TO FULL CODE CHAPTER
Provisions for the control of expansion shall be determined by the exterior plaster application designer. ASTM C 1063 Sections 7.11.4 - 7.11.4.4 do not apply.
Related Code Sections
R703.6.1.1 Wall Covering, Control Joints and Expansion Joints
Provisions for the control of expansion shall be determined by the exterior plaster application designer. ASTM C 1063 Sections 7.11.4 - 7.11.4.4 do ...
Minnesota Residential Code 2015 > 7 Wall Covering > R703 Exterior Covering > R703.6 Exterior Plaster > R703.6.1 Lath > R703.6.1.1 Control Joints and Expansion Joints
406.3.1 Gas Piping Installations, Expansion Joints
Expansion joints shall be provided with temporary restraints, if required, for the additional thrust load under test ...
2020 Minnesota Fuel Gas Code > 4 Gas Piping Installations > 406 (IFGS) Inspection, Testing and Purging > 406.3 Test Preparation > 406.3.1 Expansion Joints
406.3.1 Gas Piping Installations, Expansion Joints
Expansion joints shall be provided with temporary restraints, if required, for the additional thrust load under test ...
Minnesota Fuel Gas Code 2015 > 4 Gas Piping Installations > 406 (IFGS) Inspection, Testing and Purging > 406.3 Test Preparation > 406.3.1 Expansion Joints
(B) Equipment for General Use, Expansion Joints
Heating cables shall not be installed where they bridge expansion joints unless provided with expansion and contraction fittings applicable ...
National Electrical Code, 2020 > 4 Equipment for General Use > 424 Fixed Electric Space-Heating Equipment > 424.45 Installation of Cables Under Floor Coverings > (B) Expansion Joints
705.3.7.1 Gaseous Hydrogen Systems, Expansion Joints
Expansion joints shall be provided with temporary restraints, if required, for the additional thrust load under test ...
2020 Minnesota Fuel Gas Code > 7 Gaseous Hydrogen Systems > 705 (IFGC) Testing of Hydrogen Piping Systems > 705.3 Pressure Tests > 705.3.7 Test Preparation > 705.3.7.1 Expansion Joints