// CODE SNIPPET
607.4.2.2 Control End Wall
JUMP TO FULL CODE CHAPTER
A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub.
Related Code Sections
607.4.1.2 Plumbing Elements and Facilities, Control End Wall
A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub. Figure 607.4.1 Grab Bars ...
2010 ADA Standards > 6 Plumbing Elements and Facilities > 607 Bathtubs > 607.4 Grab Bars > 607.4.1 Bathtubs With Permanent Seats > 607.4.1.2 Control End Wall
607.4.2.1 Plumbing Elements and Facilities, Back Wall
) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall ...
2010 ADA Standards > 6 Plumbing Elements and Facilities > 607 Bathtubs > 607.4 Grab Bars > 607.4.2 Bathtubs Without Permanent Seats > 607.4.2.1 Back Wall
607 Plumbing Elements and Facilities, Bathtubs
Each grab bar shall be installed 15 inches (380 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall ...
607.5 Plumbing Elements and Facilities, Controls
Controls, other than drain stoppers, shall be located on an end wall. Controls shall be between the bathtub rim and grab bar, and between ...
607.2 Plumbing Elements and Facilities, Clearance
with 606 shall be permitted at the control end of the clearance. Where a permanent seat is provided at the head end of the bathtub, the clearance ...