// CODE SNIPPET
[F] 909.15 Control Diagrams
JUMP TO FULL CODE CHAPTER
Identical control diagrams showing all devices in the system and identifying their location and function shall be maintained current and kept on file with the fire code official, the fire department and in the fire command center in a format and manner approved by the fire code official.
Related Code Sections
909.15 Fire Protection and Life Safety Systems, Control Diagrams
Identical control diagrams showing all devices in the system and identifying their location and function shall be maintained current and kept on file ...
Building Code 2018 of Illinois > 9 Fire Protection and Life Safety Systems > 909 Smoke Control Systems > 909.15 Control Diagrams
6.7.2.2 Heating, Ventilating, and Air Conditioning, Manuals
and addresses of at least one service agency. HVAC controls system maintenance and calibration information, including wiring diagrams, schematics ...
Energy Standard for Buildings Except Low-Rise Residential Buildings 2016 of Illinois > 6 Heating, Ventilating, and Air Conditioning > 6.7 Submittals > 6.7.2 Completion Requirements > 6.7.2.2 Manuals
409.110 Equipment for General Use, Marking
An industrial control panel shall be marked with the following information that is plainly visible after installation: Manufacturer's name ...
National Electrical Code 2017 of Illinois > 4 Equipment for General Use > 409 Industrial Control Panels > 409.110 Marking
(B) Equipment for General Use, Diagram
A permanent, single-line diagram of the switchgear shall be provided in a readily visible location within the same room or enclosed area ...
National Electrical Code 2017 of Illinois > 4 Equipment for General Use > 490 Equipment Over 1000 Volts, Nominal > 490.48 Substation Design, Documentation, and Required Diagram > (B) Diagram
(C) Special Equipment, Conductors Supplying a Single Power Transformer
other connected loads. Informational Note No. 1: The nameplate current rating of a power transformer supplying a motor controller reflects ...
National Electrical Code 2017 of Illinois > 6 Special Equipment > 620 Elevators, Dumbwaiters, Escalators, Moving Walks, Platform Lifts, and Stairway Chairlifts > 620.13 Feeder and Branch-Circuit Conductors > (C) Conductors Supplying a Single Power Transformer